________________________________________________________________________________________
11 of 24
Removing the lift from the bathtub
Using the manual control, first drive AKKULIFT
®
to its lowest position. Tilt back the backrest
until the drive stops automatically in its end position. Make sure that the backrest does not
push against the wall of the bathtub.
Then remove the battery from the battery
compartment.
1. The backrest is unlocked by pressing the
red button at the top of the backrest
downwards (Figure 9).
2. Then fold downwards the backrest
by still pressing the red button and
simultaneously folding the backrest
towards the seat until it rests on
the seat (Figure 9+10). Use the
provided handle.
Figure 9
Figure 10