Restwell Intalift Armchair Owner’s Handbook
Part Code Z50992 Rev B (Page 4 of 8)
Transformer Connection:
Plug the transformer connection in to the cable coming from the chair.
Plug the 3-pin plug on the transformer into the Mains socket in the wall and switch on the power.
The transformer comes with an inbuilt rechargeable battery backup designed to give emergency power
in the event of a mains power cut. Before use, the mains power should be left switched on for at least 20
hours in ensure the battery charges. The LED will light green continuously when fully charged.
Operate the chair with nobody sat in it for a full rise and recline cycle. This is to ensure that the chair is
a suitable position and will not collide with any walls or furniture during operation.
4.
Operating Instructions and Handset Use
To Operate the Intalift Armchair:
Press button (A) to lower the foot rest to the normal position and
raise the armchair.
Press button (B) to lower the armchair and elevate the foot rest.
Press button (C) to return the backrest to the upright position.
Press button (D) to recline the backrest.
Press button (E) to return the armchair to its normal position (i.e.
legrest lowered and backrest upright)
– not included on all models
(F) is the power eye. This will flash when the chair is idle and the
battery backup is charging.
Please use the fabric loop on the right hand side of the chair
(outside of the arm) to hook the handset when not in use. Never let
children play with the handset.
If the chair is likely to be unattended for any period of time, and
children or people requiring special supervision have access to this
chair, the transformer must be removed from the mains power
supply and stored in a secure place.
F
B
A
C
D
E
Please note handset may be
visually different to model shown