Drive Medical Health Ox 18710, User Manual

Page: 32 / 50

32
Pour les transmetteurs dont la puissance maximale n’apparaît pas dans le tableau, la distance de
séparation recommandée d en mètres (m) peut être calculée à l’aide de la formule correspondant à
la fréquence du transmetteur, où P est la puissance maximale du transmetteur en Watts (W) selon le
fabricant du transmetteur.
NOTA 1 : À 80 MHz et 800 MHz, la distance de séparation de la plus haute gamme de fréquence doit être
utilisée.
NOTA 2 : Ces recommandations peuvent ne pas s’appliquer à toutes les situations. La propagation des
champs électromagnétiques est affectée par l’absorption et la réfl exion des objets, des structures et des
individus présents.
16. Symbol Definitions
Équipement de type BF
Consultez le Guide avant
l’utilisation
Saturation de l’hémoglobine
Rythme cardiaque
(battements par minute)
Symbol Definition Symbol Definition
For transmitters rated at a maximum output power not listed above, the recommended sepratation distance
d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and re ection from structures, objects and people.
Symbol Symbol
The equipment type is BF
Refer to user manual
before application
Hemoglobin saturation
No for continuous monitoring
pulse rate (bpm)
Low power indication
Serial No.
Date of Manufacture
SpO
2%
PR
bpm
SN
De nition De nition
16. Symbol Defi nitions
- 14 -
For transmitters rated at a maximum output power not listed above, the recommended sepratation distance
d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and re ection from structures, objects and people.
Symbol Symbol
The equipment type is BF
Refer to user manual
before application
Hemoglobin saturation
No for continuous monitoring
pulse rate (bpm)
Low power indication
Serial No.
Date of Manufacture
SpO
2%
PR bpm
SN
De nition De nition
16. Symbol Defi nitions
- 14 -
For transmitters rated at a maximum output power not listed above, the recommended sepratation distance
d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and re ection from structures, objects and people.
Symbol Symbol
The equipment type is BF
Refer to user manual
before application
Hemoglobin saturation
No for continuous monitoring
pulse rate (bpm)
Low power indication
Serial No.
Date of Manufacture
SpO
2%
PR bpm
SN
De nition De nition
16. Symbol Defi nitions
- 14 -
Indicateur de pile faible
Non prévu pour une surveil-
lance continue
Numéro de série
Date de fabrication