4
AFTER FOLLOWING ALL THE STEPS IN GENERAL OPERATION
PROCEED WITH THE FOLLOWING.
1. There are two batteries. Attach the wiring loom to each battery making sure that the
correct polarity is observed. Red wire attach on positive pole (also the red color).
Black wire attach on negative pole (also the black color). Connect the power cables
(located at front right side)to the appropriate plugs and ensure that the power cables
are clear of obstacles when replacing the battery box lid. Tighten the battery box-
securing strap. (Fig. 15)
2. Place batteries into battery boxes. Insert the battery box with the external power
connection towards the front of the chair.
3. Slide the power control module into the mounting bracket under the armrest and
secure it into position. Your control module can be mounted either on the left or right
hand side of the chair.
4. Ensure that all the power connections are correctly fitted.
Fig. 4. Step 1
Fig. 5. Step 2
Fig. 5. Step 3 Fig. 6. Step 4
