assEMbLY InstruCtIons
Attach back support by sliding mount-
ing tubes through aluminum extrusion
mounts and lock into place with spring
loaded push-pins.
Periodically check assembly for continued
tightness. NEVER USE BATH SAFETY SEAT
IF ANY LOOSENESS IN THE ASSEMBLY
IS NOTICED, AS PERSONAL INJURY MAY
RESULT. SIT, DO NOT STAND on the seat to
avoid a possible dangerous fall.
CAUTION:
Maximum weight limitation
for this product not to exceed 300 lbs.
Meets ANSI Standard A117 1 specifications.
NOTE:
To maintain the beauty of the original
finish, clean with mild soap and rinse with
warm water. Wipe bath seat dry after
each use.
Tool-Free Assembly
aluminum
Extrusion
Mounts
Mounting
tubes
