3
VAPOR-LOGIC
®
VERSION 6 INSTALLATION AND OPERATION MANUAL
Humidification system overview
Vapor-logic
display
Humidifier
OM-7942_VL
Dispersion assembly
Every humidification system with a Vapor-logic controller has a display connection and an Ethernet
connection for connecting to a Web interface on a computer . A GTS humidifier is shown here,
with display mounted on the cabinet . Other types of DriSteem humidifiers can have the display
contained within a control cabinet or mounted remotely .
Connect a computer directly to the
Vapor-logic board, or through a
network, to use the Web interface
OPERATING CONDITIONS
The Vapor-logic main board and display must be operated and stored within
the limits listed below . Exceeding these limits can result in poor display
performance and/or damage to the unit .
Main board
Operating temperature:
32 °F to 158 °F (0 °C to 70 °C)
Storage temperature:
-40 °F to 185 °F (-40 °C to 85 °C)
Operating humidity range:
<95% noncondensing
Display
Operating temperature:
32 °F to 158 °F (0 °C to 70 °C)
Storage temperature:
-22 °F to 176 °F (-30 °C to 80 °C)
Operating humidity range:
<90% noncondensing
OVERVIEW
FIGURE 3-1: TYPICAL HUMIDIFICATION SYSTEM LAYOUT (GTS HUMIDIFIER SHOWN)
