manualshive.com logo in svg

Drill Master 67027, Set Up And Operating Instructions Manual

Share
Download
Drill Master 67027 Set Up And Operating Instructions Manual Download Page 1

18V cordless 

reciprocating saw

67027

set up and operating instructions

note: BatterY pacK (67029) sold separatelY

distributed exclusively by Harbor Freight tools

®

.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

 read this material before using this product. 

Failure to do so can result in serious injury. 

saVe tHis manual.

Copyright

©

 2009 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or any artwork 

contained  herein  may  be  reproduced  in  any  shape  or  form  without  the  express  written  consent  of 

Harbor Freight Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements,  actual  product  may  differ  slightly  from  the  product  described  herein.   Tools  required  for 

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Summary of Contents for 67027















Reviews:

No comments

Brands by name

Popular brands

Load more brands