Driver installation (PC computer only).
Insert driver CD into CD-ROM drive. Setup will start
automatically, please follow on-screen messages
to fi nish software installation. Once software is
installed plug racing wheel into PC USB port. Win-
dows will recognize and install new hardware auto-
matically. You can check
racing wheel operating
in windows control pan-
el/game controllers.
Note! Strength of vibration force is controlled by
game. If racing wheel need to be calibrated you
can perform this operation from game menu - fol-
low game instruction manual.
Troubleshooting
The driving system cannot be installed or there is
no reaction while testing the steering wheel after
installation.
DirectX Version is too low. Please change to DirectX
9.0 version or up.
There is no vibration from motor while playing
racing games.
Exit the game and reset. If it still cannot work nor-
mally, restart your PC.
The intensity of the motor becomes weak after en-
tering the games.
Please read game manual in Confi gure controller
section.
Introduction
Thank you for buying this compact size racing
wheel. It can be used with PC computer or Sony
Playstation2® and Playstation3®. To fully enjoy vi-
bration force and all of its features please read this
manual before using the device.
System Requirements
¯
PC computer or Sony Playstation2/3®
¯
CD-ROM drive
¯
Windows XP/Vista/7
Connections
Connect pedal module to the racing wheel base as
shown on picture below:
EN
DRIFTER
User’s Guide
3 in 1 Steering Wheel
MT179
Connecting to PC computer or Sony
Playstation3®
Connect to free use USB port of PC computer or
Sony Playstation3®. Before connecting to PC com-
puter please install driver fi rst.
Connecting to Sony Playstation2®
Use special plug (as shown on picture below):
