TURBODRYER
®
BALLOON
OWNER'S MANUAL
SAFETY
∞
∞
∞
∞
WARRANTY
∞
∞
∞
∞
MAINTENANCE
SPECIFICATIONS
∞
∞
∞
∞
PARTS LIST
Sahara 230V Balloon
∞
∞
∞
∞
Sirocco 230V Balloon
PURCHASE DATE: __________________________ SERIAL NO: ________________________________
DISTRIBUTOR: ________________________________________________________________________
THIS MANUAL CONTAINS IMPORTANT SAFETY WARNINGS.
PLEASE READ THESE AND SAVE THIS MANUAL FOR FUTURE REFERENCE.
Dri-Eaz is concerned about the safety of everyone who uses or comes in contact with this unit. The TurboDryer is designed to
be operated in compliance with the safety warnings and instructions provided in this manual. Like other electrical devices, the
TurboDryer can become dangerous if it is abused, damaged or misused. Failure to observe the following warnings can result in
injury to persons, fire or damage to the TurboDryer.
CAUTION - OUTDOOR USE
When using the TurboDryer outside
do not
use an extension cord and use
only with a GFCI
protected receptacle.
CAUTION - EXTENSION CORD LENGTHS
Ext ens i on cords mus t be abl e to safel y del i ver 15 am ps t o the unit . Us e of an inadequat e cord si ze can res ul t in overheat i ng and
hazard. Sel ect appropri ate cord si ze from tabl e. Do not us e a cord sm al l er i n gauge or longer in lengt h than thos e s peci fi ed.
MODEL
CORD UP TO 25’ ( 7.5M )
CORD UP TO 50’ ( 15M )
Sahara 230 Volt
1.00 mm
2
1.50 mm
2
Sirocco 230 Volt
1.00 mm
2
1.50 mm
2
DRI-EAZ PRODUCTS, INC. 1320 Josh Wilson Road Burlington, WA 98233 (360) 757-7776