07-02189C F568
1
Dri-Eaz Products, Inc.
Owner’s Manual
Stealth AV3000 Airmover
Model F568
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: +1 800-932-3030
Fax: +1 360-757-7950
www.dri
-
eaz.com
The Stealth produces high velocity airflow for ventilation and
to accelerate the evaporation of moisture from structural and other materials.
Patents:
http://www.LBpatents.com
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING!
To reduce the risk of fire or
electric shock, do not use this fan with any
solid-state speed control device.
WARNING!
Unit must be grounded. Do not
use with an extension cord. Connect only to an outlet provided
with a ground fault interrupting device.
WARNING!
Never operate a unit with a damaged power cord, as
this may lead to electrical or fire hazards. If power cord is
damaged, it must be replaced by a cord of the same type and
amperage rating.
WARNING!
Do not touch grills when unit is operating.
NOTICE:
Keep motor dry. For indoor use only.
NOTICE:
Unplug when not in use or when moving unit.
NOTICE:
Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not attended.
NOTICE:
Always operate the unit on a stable, level surface so it
cannot fall and cause injury.
WARNING!
Do not alter or modify the Stealth AV3000 in any
way. Use only replacement parts authorized by Dri-Eaz
Products, Inc. Modifications or use of unapproved parts could
create a hazard and will void the product warranty. Contact an
authorized Dri-Eaz distributor for assistance.
WARNING!
a) Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination
and/or repair.
b) Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
BEFORE YOU BEGIN
Warranty registration
Please visit warranty.drieaz.com to register your product.
Registration allows Dri-Eaz to better assist with operation,
maintenance, servicing of equipment, and to contact you in case
there is important safety information concerning your Dri-Eaz
product. If you determine service is required, have your
equipment model, serial number and original proof of purchase
available and call your distributor for assistance with obtaining a
return material authorization (RMA).
Fig. A: Parts Identification
Cord wrap. Wind cord
around housing in groove.
Secure cord with plug clip.
Variable speed control
Outlet grill. Keep
clear of obstructions.
Power outlet socket.
Tighten knob to secure
fan orientation.
Inlet grill. Keep clear
of obstructions.
Carry handle
Circuit breaker reset switch.
Hour meter.