Dri-Eaz AirPath F377 Owner'S Manual Download Page 1

 

Owner’s Manual 

Studebaker AirPath

 

Direct Flow Carpet Dryer

 

DRI-EAZ PRODUCTS, INC. 

15180 Josh Wilson Road, Burlington, WA USA 98233 

Fax: 360-757-7950

 

Phone: 360-757-7776

 

 www.dri-eaz.com  

Patents: http://www.LBpatents.com 

The Studebaker AirPath is a high velocity dryer that creates an aggressive airflow with its  

patented 360° air stream to more quickly dry carpets and hard surface floors after cleaning. 

R E A D   A N D   S A V E   T H E S E   I N S T R U C T I O N S

 

 

 
 

 

 

 

 

 

ELECTRIC SHOCK HAZARD 

WARNING! Unit must be grounded. 

WARNING! To reduce the risk of fire or electric shock, do 
not use this fan with any solid-state speed control device. 

CAUTION: To reduce the risk of electric shock, connect only to 
an outlet provided with a ground fault interrupting device. 

  Insert 3-prong plug on power cord 

  Do not use adaptor 

  Never cut off third prong 

  Do not use with an extension cord. 

 

WARNING! Keep motor dry. 

  Do not operate outdoors. Use indoors only. 

  Do not use hose or pressure washer to clean unit. Follow 

cleaning instructions in manual.  

  If motor becomes wet, allow it to dry before using. 

 

WARNING! Unplug unit before servicing

SAFETY INSTRUCTIONS 

  Read and understand manual before operating. 

  Do not lift unit while turned on.  

  The output grill on the bottom of the unit vibrates when 

unit is in operation. Do not touch grills when unit is on. 

  Turn off all controls before unplugging. Unplug when not in 

use. Do not unplug cord by pulling on cord, instead pull on 
plug only. 

Do not use cord to adjust position or move 

the unit. Always use the handle.

  

  Never operate a unit with a damaged power cord, as this 

may lead to electrical or fire hazards. If power cord is 

damaged, it must be replaced by a cord of the same type 
and amperage rating. 

  Do not drop or throw the unit. Rough treatment can 

damage the components or motor and may create a 
hazardous condition or void the warranty. 

  Always operate the unit on a stable, level surface so it 

cannot fall and cause injury. 

  Do not allow children to play with or around the unit. Be 

sure the unit is inaccessible to children when not attended. 

WARNING! Do not alter or modify your AirPath in any 
way. Use only replacement parts authorized by Dri-Eaz 
Products, Inc. Modifications or use of unapproved parts could 
create a hazard and will void your warranty. Contact your 
authorized Dri-Eaz distributor for assistance. 

INTRODUCTION 

The Studebaker AirPath is a high-velocity 360° dryer for use in 
commercial carpet or hard-surface floor cleaning to dry floors 
more quickly. 

The AirPath features:  

  Patented outlet grill design 

  360° directed airflow 

  8-blade axial fan 

  1 HP motor 

  Two-speed switch 

  Stackable rotomolded shell  

  2" wheels with locking casters 

 

HOW TO USE THE AIRPATH 

The AirPath is designed to blow air across wet surfaces for 
speedy drying. The high-volume airflow increases the rate of 
evaporation. 
 
The AirPath will dry an area approximately 12 × 12 ft. (3.6 × 
3.6 m). Place the AirPath in the center of the area. When that 
section is dry, move it to the center of the next section to be 
dried. 
 
Ensure that all wet surfaces receive good airflow. Open interior 
doors to maintain good air circulation. Doors may need to be 
braced to prevent them from blowing shut.  

 

 

 

 

WARNING 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for AirPath F377










Reviews: