DRESSTA TD-25M EXTRA, Service Manual

Page: 458 / 595

SECTION 10E
RESERVOIRS AND FILTERS
Page 6
TD-25M EXTRA DRESSTA
HYDRAULIC RESERVOIR
6. INSTALLATION
1. Attach a hoist sling to holder mounted on the reservoir (4, Fig. 10E.3) and position the
hydraulic reservoir on rear of the machine. Secure the reservoir (4) with the bolts previously
removed.
2. Reconnect suction tube (7), return hose (5) and two return hydraulic hoses (2 and 6) to the
reservoir (4).
3. Reconnect suction tube (1, Fig.10E.2) and return tube (3) to the reservoir (4).
4. Reinstall R.H. enclosure (2, Fig. 10E.2) with R.H. door (1) and secure it with bolts (3).
5. Reconnect wire harness of rear lamp.
6. Fill the hydraulic reservoir. Refer to the OPERATOR’S MANUAL for this procedure.
7. Start the engine, move the hydraulic controls in all directions and visually check hoses and
connections for leakage, check oil level and add oil if needed.