Folding Shower Seat SHST-01-TK/PL manual– Ver 2 Rev 2 01/2016
2
Preparation
1.
Prior to installation, examine all boxes and packages for shipping damage and compare the
piece count with your packing slip. After opening all boxes and packages read this
introduction carefully. Check that all of the needed parts are included in the package by
checking off the components on the “Detailed Diagram of Shower Door Components”. If the
unit has been damaged, has a finishing defect, or has missing parts, please contact our
customer support department within
3 business days
of the delivery date. Please note that
DreamLine
®
will not replace any damaged products or missing parts free of charge after
3 business days or if the product has been installed.
Feel free to contact DreamLine
®
if you
have any questions, and please provide an order number, job name or other proof of purchase
to help us identify your original order.
2.
If this unit is going to be installed in a new construction, please, install all of the required
plumbing and drainage before installing the shower.
Use a competent and licensed (if
required by local code) plumber for all plumbing installation.
3.
Please note that you should consult your local building codes with questions about
installation compliance standards. Building and plumbing codes may vary by location,
and DreamLine
®
is not responsible for code compliance standards for your project and
will not accept any returns
.
ATTENTION!
Additional wall support is required.
This shower seat MUST NOT be mounted to
sheetrock, drywall, plaster, fiberglass, acrylic or other similar wall surfaces without
appropriate and required wood or concrete backing support material.
Installation of this wall mounted folding shower seat requires that additional wood framing be
in place prior to installation. We recommend using 2” x 12” or 2” x 6” wood blocking installed
between the studs starting from the floor plate up to at least 24 inches above the shower floor.
If this additional wood framing support is not present, you may need to remove and replace a
portion of the existing shower wall to install the wood blocking. If the seat is to be mounted to
an interior wall, it may be easier to gain access to the studs from an adjoining room to install
this additional wood framing.
Additionally, the supplied wall anchors are ONLY to be used for installation into concrete or
cinder block.
Max capacity:
250 Lbs. when installing into required wood reinforcement or concrete
behind the finished wall.
