© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
SAPPHIRE-V Shower and Tub Door Manual Ver 1 Rev1 05/2022
26
© 2022 DreamLine® All Rights Reserved
Product Maintenance
SAPPHIRE-V Maintenance checklist
◻
Inspect the
Guide rail
◻
Inspect the
Guide rail brackets
◻
Inspect the
Guide block
-square to the threshold and glass
◻
Proper clearance
beneath the door glass between the threshold and within the guide block
◻
Door Glass
adjusted so that the glass makes even contact into the wall profile and into the SafeClose™ Bumpers
◻
Inspect the
SafeClose™ bumpers
◻
Inspect the
Wheel assemblies
◻
Inspect the
Roller guards
- positioned within 1/16” beneath the guide rail and tight
◻
Inspect the
Towel Bars
-tighten if loose
◻
Inspect the
edges of the door glass
for concealed damage.
Damaged glass must be replaced!
◻
Inspect
vinyl seals
- replace if damaged or missing
BASES and BACKWALLS:
To ensure long-lasting life for your acrylic back walls, wipe them off after each use with a soft cloth. To
clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abra-
sive cleansers, metal brushes or scrapers that could scratch or dull the surface.
GLASS:
To ensure long-lasting life for your glass shower products, wipe them off after each use with a soft cloth. Rinse and wipe off
the glass using either a soft cloth or a squeegee to prevent soap buildup and water spots (Hard water can etch the surface of the glass
over time if left to dry). To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain scouring
agents. Never use bristle brushes or abrasive sponges that may scratch the surface.
HARDWARE:
To ensure a long-lasting finish, wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or
cleaning products containing ammonia, bleach or acid. If accidentally used, rinse the surface as soon as possible to prevent damage to
the finish (peeling or corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with a soft cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish to stainless steel hardware, work
with (not across) the grain. Never use an abrasive sponge or cloth, steel wool or wired brush as these may permanently scratch the
surfaces.
To maximize the life of your door, it is important to regularly inspect the glass and all hardware for mis-
alignment, proper attachment, and/or damage. Contact
DreamLine
®
with any questions or concerns.
DreamLine
®
shower doors and enclosures are designed not to leak when
installed properly and the flow of water is not pointed directly at the vinyl seals.
SAPPHIRE-V SHOWER DOOR 48”x76” (SDVH48W760)