7
AQUALUX manual Ver 2 Rev 4 02/2016
Fig 5
Fig 6
1
2
3
4
1
2
Ø 1/8”
5.
Mark the drilling hole on the threshold for the
Bottom bracket (11).
Set the
Stationary glass (01)
aside.
Drill a hole into the tub surface using an
Ø1/8”
drill
bit and fasten the
Bottom bracket (11)
to the tub
surface using the
Truss head screw ST4.2×30 (12)
.
See Fig 5 for details
6.
Place the
Stationary glass (01)
back into the
designated position on the tub. Make any final
adjustments, then re-assemble the
Wall brackets
(06)
and the
Bottom bracket (11)
.
Install at least one gasket per side to protect the
glass from contact with the brackets.
See Fig 6 for details