•
Children should be supervised to ensure that they do not play with the
product. This product is not a toy.
•
Check carefully that the product is in good condition when opening the
package.
•
Never place the product near sources of excessive heat or cold.
Extreme temperatures have a negative impact on the life of electronics.
•
Never touch the plug contacts with sharp or metal objects.
•
Only use the original power supply and original accessories.
•
Keep the product away from special liquids and vapors.
•
Do not immerse any part of the product in water.
•
Switch off the product before cleaning it. Do not use solvents based on
solvents, only a soft, antistatic cloth and clean water.
•
Do not switch the product on while it is still in the packaging.
•
Unplug the appliance from the mains when it is not in use for a long
period of time or before cleaning the appliance. Always hold the power
cable by the plug and not by the cable.
•
Do not do repair attempts yourself.
•
If the product is not correctly installed or used, Dreamled
®
cannot
accept responsibility.
•
1x 7m Outdoor RGB LED String
•
1x 0,5m Power cable with controller & IP65 adapter
•
Remote control
•
1x spare bulb
This waterproof light string is suitable for indoor and outdoor use. Cable
and adapter are both IP65 (splash / rain / moisture resistant).
1.
Remove the Outdoor RGB LED String from the box and spread it out.
2.
Attach the light string to the desired location. Each lamp has its own
hanging loop for hanging and / or screwing.
Note:
Make sure that the light string is not pinched or folded and
protect it from damage.
3.
Insert the adapter of the light string into the socket. When using outdoors,
you must connect it to a waterproof outlet that is suitable for outdoor use.
Note:
Do not install the light string when it is raining or in other
unfavorable weather conditions.
The 7m light string can be expanded to 3 sets.
See illustration II
1.
Take 2 complete strings.
2.
Remove the power cable (with the adapter and the controller block) of
STRING 2. Connect the remaining connector to the connector at the
end of STRING 1. Push the two parts firmly together and tighten by
screwing the waterproof sealing part back on.
3.
Repeat this process to connect a 3rd string.
Note
: Remaining power cables are not needed, please store them for future use.
OUTDOOR RGB LED STRING
USER MANUAL OLS-710
©
DREAM-LED - VERSION 1 - 05/2021
GB
NL
FR
D
DECLARATION OF CONFORMITY
ILLUSTRATIONS
7 m
50 cm
ILLUSTRATION I
SAFETY INSTRUCTIONS
INSTALLATION
PACKAGE CONTENTS
SUPPORT
For more information, technical questions and return requests
concerning this product, you should contact:
GUARANTEE
Copyright © DreamLED
®
. DreamLED
®
is a registered trademark of TE-
Group NV. The DreamLED
®
brand stands for superior product quality
and outstanding customer service. That is why DreamLED
®
warrants this
product against all defects in material and workmanship for a period of
two (2) years from the date of original purchase of the product. The terms
of this guarantee and the extent of responsibility of DreamLED under this
warranty can be downloaded from the website: www.dream-led.eu
The luminaire is suitable for indoor & outdoor use.
The lighting fitting is designed, produced and tested in
accordance with the strictest European safety standards.
ENGLISH
ILLUSTRATION II
ILLUSTRATION III
1.
2.
3.
4.
8.
7.
6.
5.
9.
11.
10.
12.
13.
Plug the LED string into an outlet with an input voltage of 100V-240V AC.
Use the remote control to choose your favorite color setting.
See illustration III
1. ON/OFF: Turn the LED String ON/OFF.
2. DIM/Speed: In single color mode, press to adjusts the brightness of the
light. In special effect mode, press to change the speed of the effect.
3. Main colors: Red, green, blue and white. Press to select the desired color.
Press the White button to switch between Cool White and Warm White.
4. Multicolor mode: Multicolor static mode.
5. Predefined colors: Choose from other variants of the main colors.
6. STROBE: Automatic jumping change between two colors. Press again
to change the colors.
7. FADE: Automatic change of colors with blending effect.
8. TWINKLE: Automatic change of color with twinkle effect.
9. BREATH: Automatic change of color with breathing effect.
10. CHASER: Single color chasing effect. Press again to change the color.
OPERATION
11. RANDOM: Automatic jumping change of multiple colors.
12. RGB FLASH: Single color flash effect. Press again to change the color.
13. D FLASH: Two colors flash effect. Press again to change the color.
Note:
When the LED string is turned off using the remote control, the
last setting will be saved and will be reactivated when turning on the LED
string. When unplugging the LED String from the outlet, no settings will
be saved.
Company /
Entreprise
: TE-Group NV
Address: /
Adresse
: Kapelsestraat 61, 2950 Kapellen, Belgium
Product name /
Nom du produit:
DreamLED Outdoor RGB LED
String OLS-710
Product type /
Type de produit:
Outdoor RGB LED String
Conformity is guaranteed by the CE-symbol. The full text of
the EU declaration of conformity is available at the following
internet address: http://www.dream-led.be/doc_ols-710/.
La conformité est garantie par le symbole CE. Le texte complet
de la déclaration UE de conformité est disponible à l’adresse
internet suivante:
http://www.dream-led.be/doc_ols-710/.
