•
Children should be supervised to ensure that they do not play with the
product. This product is not a toy.
•
Check carefully that the product is in good condition when opening
the package.
•
Never place the product near sources of excessive heat or cold.
Extreme temperatures have a negative impact on the life of electronics.
•
Never touch the plug contacts with sharp or metal objects.
•
Only use the original power supply and original accessories.
•
Keep the product away from special liquids and vapors.
•
Do not immerse any part of the product in water.
•
Switch off the product before cleaning it. Do not use solvents based
on solvents, only a soft, antistatic cloth and clean water.
•
Do not switch the product on while it is still in the packaging.
•
Unplug the appliance from the mains when it is not in use for a long
period of time or before cleaning the appliance. Always hold the
power cable by the plug and not by the cable.
•
Do not undertake repair attempts yourself.
•
The lamps cannot be replaced.
•
If the product is not correctly installed or used, Dreamled
®
cannot accept
responsibility.
•
1x Cable LED Light
•
1x adapter
•
1x connector cable
•
10x cable ties
This waterproof light string is suitable for indoor and outdoor use. Cable
and adapter are both IP44 (splash / rain / moisture resistant).
1.
Remove the Cable LED Light from the box and spread it out.
2.
Attach the light string to the desired location. Each lamp has its own
mounting plate for hanging and / or screwing. You can also use
the supplied cable ties.
Note:
Make sure that the light string is not
pinched or folded and protect it from damage.
3.
Insert the adapter of the light string into the socket. When using out-
doors, you must connect it to a waterproof outlet that is suitable for
outdoor use.
Note:
Do not install the light string when it is raining or in
other unfavorable weather conditions.
The 5m light string can be expanded to 3 sets.
See illustration I & II
1.
Take 2 complete strings.
2.
Remove the adapter of STRING 2. Connect the adapter socket
that remains connected to the string to the connector at the end of
STRING 1. Push the two parts firmly together.
Note
: Don’t forget to remove the protective cap!
3.
Repeat this process to connect a 3rd string.
Note
:
•
If you have too much remaining cable, you can tie it together with one
of the supplied cable ties.
•
Each package contains an extra connector cable. This connector
cable can be used to add an extra adapter on a set of strings.
•
Remaining adapters and connector cables are not needed, please
store them for future use.
CABLE LED LIGHT
USER MANUAL CLL-510
©
DREAM-LED - VERSION 2 - 08/2018
GB
NL
FR
D
DECLARATION OF CONFORMITY
Hereby,
Par la présente
,
Company /
Entreprise
: TE-Group NV
Address: /
Adresse
: Kapelsestraat 61, 2950 Kapellen, Belgium
declare that the following equipment:
déclare que le dispositif suivant:
Product name /
Nom du produit:
Dreamled CLL-510
Product type /
Type de produit:
Cable LED Light
conforms with the following safety requirements of the
directives 2014/30/EU, 2014/35/EU, 2011/65/EU &
EC/1907/2006. Conformity is guaranteed by the CE-symbol.
This product has been tested against following standards and
specifications, applying versions valid in June 2018. The full
text of the EU declaration of conformity is available at the
following internet address:
http://www.dream-led.be/DOC_CLL-510.
est conforme aux exigences de sécurité suivantes des
directives 2014/30/EU, 2014/35/EU, 2011/65/EU &
EC/1907/2006. La conformité est garantie par le symbole CE.
Ce produit a été testé par rapport aux normes et spécifications
suivantes, appliquant les versions valides en Juin 2018.
Le texte complet de la déclaration UE de conformité est
disponible à l’adresse internet
http://www.dream-led.be/DOC_CLL-510.
EN 55015: 2013 +A1: 2015
EN61000-3-2: 2014
EN 61000-3-3: 2013
EN 61547: 2009
EN 61000-4-2: 2009
EN 61000-4-3: 2006 +A1: 2008 +A2: 2010
EN 61000-4-4: 2012
EN 61000-4-5: 2014
EN 61000-4-6: 2014
EN 61000-4-11: 2004
EN 60598-2-20: 2010
IEC62321-3-1: 2013
J Van Os, Product & Research Manager
Authorized Signature, Kapellen - August 2018
ILLUSTRATION
500 cm
300 cm
ILLUSTRATION I
1.
Press the button on the adapter once to turn on the Cable LED Light.
2.
Press the button again to activate the timer (TIMER mode, 6 hours):
The timer will be set to 6 hours automatically and then switch OFF.
The light will then stay OFF for 18 hours and start again automatically
for 6 hours the next day at the same time.
Note:
The timer works for 24h a day, this means that the power for
the lighting should always be ON for the timer to work correctly. If
the power is interrupted / turned OFF by means of the button on the
adapter, the timer settings are lost and should be set again.
3.
Press the button on the adapter once more to switch off the light string
or remove the plug from the socket.
SAFETY INSTRUCTIONS
INSTALLATION
PACKAGE CONTENTS
OPERATION
SUPPORT
For more information, technical questions and return requests
concerning this product, you should contact:
GUARANTEE
Copyright © DreamLED
®
. DreamLED
®
is a registered trademark of TE-
Group NV. The DreamLED
®
brand stands for superior product quality
and outstanding customer service. That is why DreamLED
®
warrants this
product against all defects in material and workmanship for a period of
two (2) years from the date of original purchase of the product. The terms
of this guarantee and the extent of responsibility of DreamLED under this
warranty can be downloaded from the website: www.dream-led.eu.
ENGLISH
ILLUSTRATION II
IT
ES
