DreamGEAR shadow 6, User Manual

Page: 1 / 3

FOR TECHNICAL SUPPORT PLEASE CONTACT:
1-877-999-DREAM
or support@dreamgear.net
CHARGING WHILE PLAYING:
The Shadow Wireless controller can be charged during game play.
1. To charge the Shadow Wireless during game play, both the USB
charge cable and USB receiver must be connected to your
PlayStation 3 game console.
2. To play and charge your Shadow Wireless controller, please
follow the previous charge and set-up portion of this User’s
Guide.
NOTE: The Shadow 6 Wireless is compatible with all games that
feature the SIXAXIS icon. Please refer to your software user’s guide.
TROUBLESHOOTING:
Problem: The Shadow 6 Wireless is not connecting/flashing.
Solution: Connect the charge cable to re-charge the Shadow 6
Wireless.
Problem: The Shadow Wireless controller does not function
properly.
Solution: Reconnect the controller by performing a sync of the
controller and receiver. If problems still persist, press the reset
button located on the back of the Shadow 6 Wireless.
PACKAGE CONTENTS:
•
Shadow 6 Wireless Controller
•
USB Receiver
•
Charging Cable
•
User’s Guide/Warranty Card
•
Registration Card
CHARGING SHADOW 6 WIRELESS:
1. The Shadow 6 Wireless controller features an internal recharge-
able battery. To charge the Shadow 6 Wireless, use the included
USB charge cable or your original Sony USB charge cable.
2. Connect the mini USB cable to the mini USB port located on the
top of the Shadow 6 Wireless controller.
3. Connect the standard USB plug to any available port on your
PlayStation 3 game console. Your PlayStation 3 must be
powered “ON” in order for the Shadow Wireless to charge. The
DG/PS3 menu button will flash to indicate charging has begun.
When the controller is fully charged, the LED will become solid.
NOTE: You can also charge Shadow Wireless from any powered
USB port.
SHADOW 6 WIRELESS SET-UP:
1. Connect the included USB receiver to any available USB port on
the PlayStation 3 game console.
2. Press the connect button on the USB receiver. The receiver LED
will flash rapidly.
3. Press the DG/PS3 menu button. The LED on the receiver and
controller will become solid when the controller is properly
synced to the PlayStation 3.