DreamGEAR Power Bricks User Manual Download Page 1

www.dreamgear.net

Power Bricks

USER’S GUIDE

KEEPING YOUR BATTERY CLEAN:

Be  sure  and  keep  your  Power  Brick  Rechargeable  Battery  clean.  Dirt  and 

debris may harm the battery contacts. Use a dry cloth to clean the battery. 

DO NOT use water or any chemicals to clean.

INSERTING YOUR BATTERY PACK:

Press  tab  on  top  of  the  Power  Brick  and  pull  down  to  detach  it  from  the 

controller. Insert the battery pack into the battery compartment located on 

the back of the controller and lock into place.

NOTE: Avoid pinching your fingers by pushing only on the flat surface of the 

Power Brick Rechargeable Battery.
It  is  very  important  to  charge  your  Power  Brick  before  the  first  use  and 

whenever it is depleted. When the battery is unused for a long time, the Power 

Brick  may  lose  its  charge.  Do  not  be  alarmed  if  the  battery  becomes  warm 

during the charging cycle or use. This does not indicate a problem. It is normal.
It may take up to 20 minutes to have enough power for the Power Brick to be 

used. After long period of nonuse, it may take 3 to 5 charging cycles for the 

Power Brick to be at its full capacity. Replace the Power Brick when play time 

becomes shortened or when it can no longer be charged.

TROUBLESHOOTING:

Problem:

 The Power Brick charge diminishes too quickly.

Solution:

  After  many  charge  cycles  and  as  the  Power  Brick  ages,  the 

amount of play time will decrease. If the play time starts getting shorter or if 

the battery does not charge anymore, replace with a new battery.

Problem:

 Charge time is too slow.

Solution:

  When  charging  and  playing  at  the  same  time,  the  Power  Brick 

takes  longer  to  charge.  Certain  games  require  vibration,  this  will  also 

increase charge time.

Problem:

 The charge light doesn’t illuminate.

Solution:

 Make sure the Power Brick is completely locked into the battery 

compartment. Detach and re-attach a few times. Check the contacts to see 

if they have been damaged.

Problem:

 The battery isn’t charging.

Solution:

 Make sure the Power Brick is properly and securely inserted into 

the charger. Make sure the contacts on the Power Brick aren’t damaged or 

compromised.

CONTENTS:

• 2 Power Bricks

• User’s Guide/Warranty Card

• Registration Card

Reviews: