Dream 5704PiaRef, User Manual

Page: 8 / 22

PiaRef - User's Manual
Rev 31/03/16
8
© 2014-2016 Dream S.A.S.
2.2.14 Registrations
Presets can be stored in 8 Registrations. Registrations are memorized even after power off.
Registrations retain the following parameters:

Upper Sound

Lower Sound

Upper Volume

Lower Volume

Balance

Dual/Split Setting

Split point

Damper Pedal Assign

Lower Octave Shift

Brilliance

Tune

Transpose

Reverb Type

Reverb Volume

Chorus Type

Chorus Volume

Touch Curve

Touch Constant Curve Value

Temperament

Root Note

Tempo

Metro. Signature

Metro. Level

Audio In setting

MIDI Channel

Local On/off

Program Change On/off

Piano Mode On/Off
To save your current setting in one registration, do the next steps:
 Check that the “Registration” LED is off.
 If it is On, press the “Registration” button to quit the registration mode.

Adjust all parameters until you get the setting that you want to save in one registration
 Press and hold “Registration” button.
 Press one of the 8 “Instrument select” buttons.

The current setting is now stored in the registration corresp
onding to the “Instrument Select” button that
you have pressed.
To recall a registration:
 Enter registration mode by pressing “registration” button.
 “Registration” LED is On to show that you are in registration mode.

To recall a registration, just press
the corresponding “Instrument” select button.
To exit registration mode:

Press the “Registration” button to get the “Registration” LED Off