PiaRef
-
User's Manual
Rev 31/03/16
13
© 2014-2016 Dream S.A.S.
3.3.4 Audio Input
5704PIA-FK has a stereo audio input that can be used with different settings.
Press the fifth
”Instrument select” button. Display toggles between “
A.i n
" and “
O F F
”. Audio in is
disabled.
Use “Plus” and “Minus” buttons to switch between settings:
“
L.I n
”. Line in config. Audio In Left mixed in Output Left without Reverb and Audio In Right mixed in
Output Right without Reverb
“
M c.1
”. Mike input config 1. Audio In Left mixed in Output Left and Output Right with low send to
Reverb. Audio In Right is Off.
“
M c.2
”. Mike input config 2. Audio In Left mixed in Output Left and Output Right with medium send to
Reverb. Audio In Right is Off.
“
M c.3
”. Mike input config 3. Audio In Left mixed in Output Left and Output Right with high send to
Reverb. Audio In Right is Off.
3.4 MIDI Menu
Midi parameters c
an be configured by pressing repetitively on the “Set” button until the display shows “
M i d
”.
Then following parameters can be adjusted:
3.4.1 Transmit channel
Transmit channel is MIDI transmit channel for keyboard upper notes. Keyboard lower/dual notes will be transmitted
on next greater channel.
Press the first ”Instrument select” button. Display toggles between “
t r.C
” and “ 1 ”. Use “Plus” and
“Minus” buttons to select the Midi transmit channel in range“1-16”
3.4.2 Local Control On/Off
Local Control On/Off function allows connecting or not the Sound engine to Keyboard. If Local Control is On
keyboard can play sound engine and send notes info to MIDI out. If Local Control is Off keyboard is not connected
to sound engine but it continues to send notes info to MIDI out.
Press the second “Instrument select” button. Display toggles between “
L c l
" and “
O n
”. Use “Plus” and
“Minus” buttons to set the Local control to “
O n
” or “
O f f
”
3.4.3 Program Change On/Off
Program Change On/Off function decides if Program Change are received and transmitted by piano board-.
Press the third “Instrument select” button. Display toggles between “
P G.C
” and “
O n
”. Use “Plus” and
“Minus” buttons to set value to “
O n
” or “
O f f
”
3.4.4 Piano Mode On/Off
Piano Mode On/Off decides how the MIDI In will be played:
If Piano Mode is on, only Note and Pedal event are kept. All MIDI in channels are played in the same way that if
you were pressing the keys on the keyboard. All buttons of the piano front panel and their functions can be used in
this mode.
If Piano Mode is Off, MIDI In channels 1-16 are played in GM mode.
By default, Piano mode is On. Receiving a system excusive message GM Reset or GS Reset on MIDI In will switch
off the Piano mode. Piano mode setting can also be done manually:
Press the fourth “Instrument select” button. Display toggles between “
P.M d
" and “
O n
”. Use “Plus” and
“Minus” buttons to set the Piano mode “
O n
” or “
O f f
”
