Reference Manual
19
3.1.6.1
Load
Shows a graph of the system load (CPU usage).
3.1.6.2
Traffic
Shows graphs for the inbound and output data traffic that is transmitted over
each network interface. Very handy tool to check the current upload of the
Targa transmitter.
Please note that the “br-lan” network is identical to “eth0”, both refer to the
local LAN port.
3.1.6.3
Wireless
The
Wireless
tab has no function for this system.
3.1.6.4
Connections
The
Connections
tab shows IP connections between the Targa and other
devices. This is a very useful debugging tool if you are facing connection
problems.
3.2
System
On the
System
tab general system settings can be set. It also provides a tab
for firmware updates.
3.2.1
System
In the system sub tab you can configure the device hostname, the timezone
and the logging behavior of the system. In the lower half of the tab an NTP
client can be setup. This can be used to synchronize the system time with a
time server on the internet, or a local time server you provide.
3.2.2
Administration
Here you can set a password for the web interface. As long as no password is
set, you may connect to the transmitter using a telnet session, after you have
setup a password, you have to use SSH access instead. The experienced user
can setup SSH access details on this tab as well. Please do not alter the SSH
