55 of 95
Reference Manual ATOM one SSM500
10.33
color_space<color space>
Configures the image pipeline for the selected color space. This is a high-level command
which will change both the color cross talk an color conversion matrix.
If you are using a custom color cross talk matrix (see chapter 10.31) it will be automatically
converted when switching the color space, but due do rounding errors in the conversion
each switch will result in a more altered color cross table.
The color conversion matrix (see chapter 10.30) will always be set to the default for the
selected color space, this means any changes the user has made will be overwritten when
the color space is changed.
Value
Color Space
Usually used for
0 (reset)
Rec.709
HD / SDR
1
Rec.2020
UHD / HDR
10.34
mcc <flag>
Multimatrix color correction control.
Flag
Function
0
disable
1 (reset)
enable
10.35
mcc_opmode <flag>
Sets the number of color angles/segments for the multi matrix.
The segment 0 is at the top of the color circle with the color red.
Please refer to the GUI as reference.
Flag
Function
0
12
1
16
2 (reset)
24
3
32
10.36
mcc_blink <mask> [<period_ms>]
This function lets the select multi matrix color range blink with a given period time.
This can be used to check if the selected colors are correct.
Value
Minimal
Maximal
Comment
mask
0
0xFFFFFFFF
Each bit of the mask represents the blink mode of
one phase of the MCC. Setting it to 1 enables
blinking for this phase.
