23 of 95
Reference Manual ATOM one SSM500
representative for all cameras, reply to commands as usual, while all other cameras are
silent.
To set the broadcast master, use the command
rs485_bc_master
. Note that this
command may be send to an individual camera, or over the broadcast channel. Sending it
over the broadcast channel ensures, that only one master is active in the system.
Reminder: All of this is only valid for communication over the broadcast address,
communication over the device address is unaffected and works as usual.
Also see the descriptions of the
rs485_bc_addr
and
rs485_bc_master
commands for
more details.
6.6 Inbuild Help
Type
help
to get a full list of supported commands. It is possible to get a detailed help for
each command by typing "help <cmd>".
Example to get help for the
video_mode
command:
help video_mode<Enter>
video_mode <video mode> - set video mode
6.7 Command parser
The command parser supports abbreviated commands. This means that it is only required
to type as many characters until the command is unique.
Example for equivalent commands:
save_settings
save
sa
For interactive operation this is useful to save typing time.
Note: It is not recommended to use the short commands in any control or application
software. The reason is, that future extensions may make a current unique short command
ambiguous.
