18
6. Global Settings
No.
Setting Name
Possible Values
Description
1
PITCH WHEEL
From 0 to 12 semitones
Lets you set how much the pitch wheel will fully shift the
pitch. Use the LFO
WAVE
slider (slider 14) to adjust.
2
FINE TUNE
+/- 4 Semitones
Lets you fine tune the instrument as a whole. Use the LFO
WAVE
slider (slider 14) to adjust.
3
SLIDERS
Jump or Catch
Lets you decide whether the slider value automatically
jumps
to the position of the slider, or you have to move the
slider past the stored value before it responds (
catch
). Use
the LFO
WAVE
slider (slider 14) to select.
4
LOAD PREVIEW
Off/On
Lets you turn patch preview on or off, where you can
preview the stored patch before loading it. Use the LFO
WAVE
slider (slider 14) to turn on or off.
5
CC
In: Off/On Out: Off/On
Lets you turn on or off whether the Nymphes responds to
midi CC values. Use LFO
RATE
slider (slider 13) to set. Lets
you turn on or off whether the Nymphes sends midi CC
values. Use the LFO
WAVE
slider (slider 14) to set.
6
PROGRAM CHANGE In: Off/On Out: Off/On
Lets you turn on or off whether the Nymphes responds to
program change messages. Use the LFO
RATE
slider
(slider 13) to set. Lets you turn on or off whether the
Nymphes sends program change messages. Use the LFO
WAVE
slider (slider 14) to turn to set.
The global settings offer six more parameters that affect the Nymphes’ operation. These are the only
parameters that are saved outside of the normal patch settings. See the MENU MAP for a graphic description
of the steps outlined below.
To access the Global Settings:
1) Press the
MENU
button, which will light
2) Select option 7 (
MIDI CHANNELS
)
3) With
SHIFT
lit, press the
MENU
button again, which will start flashing slowly
4) With the rotary switch, select options 1 through 6 to access to the various Global Settings
5) With either the LFO
RATE
slider (slider 13) or the LFO
WAVE
slider (slider 14), adjust the settings as desired.
The list of Global Settings
