manualshive.com logo in svg

Draytek VigorAP 906, User Manual, Page: 104 / 171

Share
Download
Draytek VigorAP 906 User Manual Download Page 104

 

 

96 

III-1-6 Syslog/Mail Alert 

Syslog function is provided for users to monitor AP. There is no bother to directly get into the Web 
user interface of the AP or borrow debug the equipment. 

 

Available settings are explained as follows: 

Item Description 
Syslog Access Setup 

Enable

 - Check 

Enable

 to activate the function of Syslog. 

Server IP Address

 -The IP address of the Syslog server. 

Destination Port

 -Assign a port for the Syslog protocol. The default 

setting is 514. 

Log Level

 - Specify which level of the severity of the event will be 

recorded by Syslog. 

Mail Alert Setup 

Enable

 - Check 

Enable

 to activate the function of mail alert. 

SMTP Server 

-

 

The IP address of the SMTP server. 

SMTP Server Port - 

Set the port number for the SMTP server. 

Mail To 

-

 

Assign a mail address for sending mails out. 

Summary of Contents for VigorAP 906












































































































































































Reviews:

No comments