manualshive.com logo in svg

Draytek VigorAP 906, User Manual, Page: 101 / 171

Share
Download
Draytek VigorAP 906 User Manual Download Page 101

 

 

93 

III-1-4 User Password 

This page allows you to set new account and password for accessing the web pages under User 
Mode. 

 

Available settings are explained as follows: 

Item Description 

Enable User Mode 

After checking this box, you can access the web user interface with the 
password typed here for simple web configuration. 
The settings on a simple web user interface will be different from a full 
web user interface accessed by using the administrator password. 

Account 

Enter a user name. 

Password 

Enter a new password in this field. The length of the password is 
limited to 31 characters. 

Confirm Password 

Enter the new password again. 

Click 

OK 

to save the settings

.

     

Settings to be configured in User Mode will be less than settings in Admin Mode. Only basic 
configuration settings will be available in User Mode. 

Summary of Contents for VigorAP 906












































































































































































Reviews:

No comments