Draytek Vigor2762 series, User Manual

Page: 184 / 651

as "0x321253abcde...").
Pre-Shared Key (PSK) - Either 8~63 ASCII characters, such
as 012345678..(or 64 Hexadecimal digits leading by 0x, such
as "0x321253abcde...").
WEP
64-Bit - For 64 bits WEP key, either 5 ASCII characters, such
as 12345 (or 10 hexadecimal digitals leading by 0x, such as
0x4142434445.)
128-Bit - For 128 bits WEP key, either 13 ASCII characters,
such as ABCDEFGHIJKLM (or 26 hexadecimal digits leading
by 0x, such as 0x4142434445464748494A4B4C4D).
All wireless devices must support the same WEP encryption
bit size and have the same key.
Four keys can be entered
here, but only one key can be selected at a time. The keys
can be entered in ASCII or Hexadecimal. Check the key you
wish to use.
After finishing all the settings here, please click OK to save the configuration.
III-1-4 Access Control
III-1-4 Access Control
In the Access Control , the router may restrict wireless access to certain wireless clients
only by locking their MAC address into a black or white list. The user may block wireless
clients by inserting their MAC addresses into a black list, or only let them be able to connect
by inserting their MAC addresses into a white list.
In the Access Control web page, users may configure the white/black list modes used by
each SSID and the MAC addresses applied to their lists.
Vigor2762 Series User’s Guide 174