Draytek Vigor 160 Series, Quick Start Manual

Page: 9 / 20

3
3
3
.
.
P
P
a
a
n
n
e
e
l
l
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
LED Status Explanation
ACT Off The system is not ready or has failed.
Blinking The system is ready and operating normally.
P1/P2 On Ethernet LAN (RJ45) is connected.
Off Ethernet LAN is disconnected.
Blinking Data is transmitting (sending/receiving).
DSL On DSL connection synchronized.
Blinking DSL connection is synchronizing.
Interface Description
DSL RJ11 Connector for your G.Fast / VDSL2 / ADSL2+ line
P2-P1 RJ45 Connector for connected router/firewall/PC.
Factory Reset Restore the default settings. Usage: Turn on the modem. Press
the button and hold for more than 10 seconds. Then the modem
will restart with the factory default configuration.
ON/OFF: Power switch.
Connecter for a power adapter. Use only the original PSU supplied
with the unit, or an original replacement supplied by DrayTek.
Note Remove the protective film from the router before use to ensure
ventilation.