6
MAINTENANCE
TROUBLE SHOOTING _
• Machine has no power
- Check the power supply by plugging another device into the power point.
- Check the power switch on the machine.
- Check the power cord is connected properly at both ends.
- Remove the power cord from the power supply and inspect it for damage.
- If the problem continues contact DRAX INC. Customer Support Center.
• Treadmill Belt is slipping
- Refer to section 2.5 of this manual ‒ Adjustment of Belt Tension.
• Rubbing or scraping sound coming from the machine
- Check for any foreign objects that might be lodged underneath the machine.
- Check the tracking of the running belt.
• Speed Sync feature is unresponsive
- Switch the treadmill off at the power supply and wait for 1 minute.
Then switch the power back on re starting the treadmill. Note: Make sure that there is no one on
the treadmill during the start up. The treadmill calibrates the load cells under the treadmill deck
during start up. If there is weight on the deck during this period the machine will not calibrate correctly
causing the Speed Sync to be un responsive.
• Treadmill Suddenly Stops
- Check that the Emergency-stop hasn’t been activated.
Always only use the grounding type power cord that is supplied with
the exercise equipment.
Notice
Please Contact DRAX INC. Customer Support Center for assistance.
Notice
19
