36
Gentier Real-Time PCR System
QuickStart Bar
.
3.3 Operation Area
After creating a new experiment file or open an experiment file, the operation area on the main
interface of the application software will be activated, as shown in figure D-4.
Figure D-4. Operation area on main interface
1.
The experiment file created or opened will be displayed in the experiment file tab at the
bottom of operation area and user can select or close any experiment file in this tab.
Reminding
: if several experiment files are created or opened at the same time, user can
click
and
icon on the right side of the experiment file tab to view all experiment
files; or click
icon to view the list of all experiment files.
2.
The operation area is consisted of four tabs:
Run Setting, Sample Setting, Run Monitoring
and
Analysis
. User can select different tabs for relevant operations to realize complete
experiment workflow.
