111
Gentier Real-Time PCR System
2.3 Run Monitoring
After finishing the experiment setting, user can press the
<
Run Experiment >
function
key to start running the current experiment, the system will enter the run monitoring interface,
which is consisted of three parts: run status bar, run monitoring option bar and run monitoring
diagram, as shown in figure E-5.
Figure E-5. System software – Run Monitoring interface
1.
Run Status Bar
: displays the real-time running status of the the current experiment,
includes
Remaining Time
,
Stage
,
Cycle
and
Step
.
2.
Run Monitoring Option Bar
: user can select
Fluorescence
or
Temperature
option in the
run monitoring option bar to monitor the corresponding content of the current
experiment.
▶
User can press the
Fluorescence
option to monitor the real-time amplification curve,
melting curve and fluorescence heat map of the current experiment.
▶
User can press the
Temperature
option to monitor real-time temperature program of the
current experiment
