User Manual of CIC-D100 Ion Chromatograph
63
B.5.1 Steps for connecting SHA-1 to instrument trigger line
1. Take out the trigger wire in the instrument accessory box;
2. Connect one end of the trigger line to the trigger port of the automatic sampler and
connect the other end to the automatic sampler port of the instrument;
1. Align the notch of the trigger line upward to the trigger port. When connected, if the
groove is perceived to be clamped in, the connection is completed.
Figure B-1 SHA-1 trigger port
B.5.2 Steps for connecting SHA-11D to instrument trigger line
Insert one end of the trigger line into the communication line interface of the rear panel of
the automatic sampler, and connect the other end to the instrument communication line interface,
and insert it firmly. The rear panel is shown in the following figure.
Figure B-2 SHA-11 rear panel
Trigger port
Trigger line port
Groove
Power switch
Power cord port
Trigger port
