Copyright © 2002 Draper, Inc.
Form Cinefold_Inst02
Printed in U.S.A.
Assembly Instructions
Cinefold Portable Projection Screen by Draper
Frame
Hinges and
hinge locks
Handy Crank
Viewing
Surface
KE Adjustment
Knob
2" Min.
44" Max.
Anti-sway stabilizers
optional with HD legs
Standard T-Leg
Frame
Snaps
Handy Crank
Viewing
Surface
Bottom row of snap
studs to accept skirt.
Standard T-Leg
Heavy duty legs optional
Frame/Screen Assembly
➀
Open carrying case and remove pouch containing screen
surface, divider, and three aluminum assemblies. The
largest package is the frame. Unwrap and unfold it
completely in one direction only, locking all hinges. Frame
should lie with snaps facing up.
➁
Remove surface from its envelope. With male snaps at
bottom, snap surface to frame. Begin at the 4 corners, and
work across the bottom, up the sides, and across the top.
Make sure snaps are secure.
Please note: For steps 3-5, screen should remain on floor or
table, with surface facing up. Carefully lift screen from floor or
table to complete each step.
➂
Lock corner braces.
➃
Unfold leg assemblies and lock hinges. Check that
adjustment knob is in the hole desired (upper for vertical
screen position, lower for keystone elimination). DO NOT
unfold feet at this time.
➄
Attach legs to back side of vertical frame sections, as
indicated by the color coded markings, using Handy
Cranks. For standard screen height, match colored tapes
exactly. Height is adjustable in 6" increments.
➅
Raise Cinefold to a vertical position and unfold feet. Tighten
adjustment knobs to maintain legs at desired angle. If your
screen includes Heavy-Duty Legs, unfold and lock the
extensions on the backs of the feet, hinge up to the backs of
the leg, and attach with Handy Crank.
➆
If Anti-Sway stabilizers are supplied with your screen, refer to
illustration and attach with Handy Cranks.
A Note About Surfaces
➀
Always fold with snaps face-to-face. Do not permit screen
fabric to contact border material or snaps when folded. Store in
pouch provided, and retain case divider to separate pouch
from aluminum parts when in case.
➁
Take care at all times not to permit Cinefold viewing surface to
contact any dusty or dirty area, nor any varnished or painted
object.
➂
When necessary, clean Cinefold viewing surface with mild
soap and water. USE NO SOLVENTS! Surface must be
completely dry before folding.
Caution
➀
Read instructions through completely before proceeding; retain for
future reference.
➁
Handle viewing surface with care; do not allow it to come in contact
with sharp or dirty objects.
➂
Use Handy Cranks provided; failure to do so may lead to screen
damage.
➃
Make sure screen is level.
➄
Do not write on viewing surface.
411 S. Pearl St., Spiceland, IN 47385 USA
❚
765-987-7999
❚
fax 765-987-7142
e-mail [email protected]
❚
www.draperinc.com
