Draper Ceiling Trim Kit Instructions Installation & Operation Download Page 1

A

B

G

F

C

H

E

D

 CAUTION  

1. 

Read instructions through completely before proceeding.

2. 

Follow instructions carefully. Installation contrary to instructions invalidates warranty.

3. 

Should be installed level 

(using a carpenter’s level)

.

4. 

Before assembling ceiling slot trim kit, slot fascia must be cut to size 

(see drawings)

.

5. 

Mount ceiling slot trim kit to screen case before suspending case.

6. 

Hardware for assembling ceiling slot trim kit and attaching to screen case is provided; 

installer is responsible for providing appropriate hardware for suspending or 

otherwise mounting screen case.

7. 

Please also refer to the drawing on page 2.

 

The Ceiling Opening Trim Kit is for use in an 

acoustical, drop ceiling only. Not recommended 

for drywall or hard ceilings.

 

Excess metal hanger 

material can be cut off 

or folded over. Hangers 

can also be used to 

suspend screen.

Please Note:

 Case Attachment Brackets 

(H)

 

have two attachment holes. If not using 

Rigid Perforated Straps 

(D)

 to suspend 

screen, refer to specific screen instructions 

for details on which hole can be used for 

attaching ceiling slot kit to screen case.

Please Note:

  

For the largest size trim 

kit - 174" 

(4.42m)

 - two 

Anti-Deflection Brackets 

are also provided.  

For installation details, 

see page 2.

Parts List

Slot Fascia 

(2)

Left Fascia Bracket 

(1)

Right Fascia Bracket 

(1)

Rigid Perforated Strap 

(4)

10-32 Nylon Insert Lock Nut 

(10)

Hex Head Screw #10-32 x .5" 

(12.7mm)

 Long 

(16)

Cross Head Screw #6-32 x 

3/4

(19mm)

 Long 

(8)

Case Attachment Bracket 

(2)

 

Assemble ceiling slot 

trim kit and attach to 

screen case before 

suspending screen case.

 

Slot fascia may need to be cut to 

proper width. Measure total case 

width 

(from outer edges of endcaps)

 

and cut slot fascia to match that 

width. Make sure cuts are square.

 

“V” notched end piece fits beneath  

7/8

(22mm)

 hole for electrical connection.

Please Note:

 Ceiling Trim Kit 

NOT FOR USE 

on Targa XL 

and Premier XL screens.

Draper, Inc.  |  411 S. Pearl St. Spiceland, IN 47385 

draperinc.com  |  765.987.7999  |  800.238.7999  

© 2020 All Rights Reserved 

FORM: CeilingTrimKit_Inst20

Ceiling Trim Kit

For recessing Targa and Premier projection screens

INSTRUCTIONS

INSTALLATION & OPERATION

If you have any difficulties installing or servicing your  

Ceiling Trim Kit, call your dealer or Draper, Inc. 

Reviews: