background image

– 14 –

11. WARRANTY 

 

11.1   WARRANTY

Draper tools have been carefully tested and inspected 

before shipment and are guaranteed to be free from 

defective materials and workmanship.
Should the tool develop a fault, please return the 

complete tool to your nearest distributor or contact: 
Draper Tools Limited
UK: 

Chandler’s Ford, Eastleigh, Hampshire,    

 

SO53 1YF. England. 

EU: 

Oude Graff 8, 6002 NL Weert (NL).

Telephone Sales Desk: +44 (0)23 8049 4333 or: 
Product He44 (0)23 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is 

due to defective materials or workmanship, repairs will 

be carried out free of charge. This warranty period 

covering labour is 12 months from the date of purchase 

except where tools are hired out when the warranty 

period is 90 days from  the date of purchase. This 

warranty does not apply to any consumable parts, any 

type of battery or normal wear and tear, nor does it 

cover any damage caused by misuse, careless or 

unsafe handling, alterations, accidents, or repairs 

attempted or made by any personnel other than the 

authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of 

warranty, repairs and carriage charges will  be quoted 

and made accordingly.
This warranty applies in lieu of any other warranty 

expressed or implied and variations of its  terms are not 

authorised.
Your Draper warranty is not effective unless you can 

produce upon request a dated receipt or invoice to verify 

your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit 

and does not affect your statutory rights.
Draper Tools Limited.

12.  DISPOSAL  

 

12.1 DISPOSAL

–  At the end of the machine’s working life, or when it 

can no longer be repaired, ensure that it is disposed 

of according to national regulations.

–  Contact your local authority for details of collection 

schemes in your area.

 

In all circumstances:

 

•  Do not dispose of power tools with    

 

 

domestic waste.

 

•  Do not incinerate.

 

•  Do not dispose of WEEE* as unsorted  

 

 

municipal waste.

 

    

*  Waste Electrical & Electronic Equipment.

Summary of Contents for 70047















Reviews: