Draper 04742 Manual Download Page 6

5. Health and Safety Information

Important: Read all the Health and Safety instructions 

before attempting to operate, maintain or repair this 

product. Non-compliance with these instructions may 

result in injury or damage to the user or the product.

5.1  General Health and Safety 

Precautions For This Heater

•  Observe all standard safety precautions and good 

practices when working with electrical equipment.

• Take extra care when using this product around 

children.

− Children of less than three years should be kept 

away unless continuously supervised.

− Children aged between three years and eight 

years shall only switch on/off the appliance if it 

has been placed or installed in its intended 

normal operating position and they have been 

given supervision or instruction concerning use of 

the appliance in a safe way and understand the 

hazards involved.

− Children aged between three years and eight 

years shall not plug in, regulate and clean the 

appliance or perform user maintenance.

• Keep your work environment clear and well-lit, with 

bystanders at a safe distance.

• Before every use, inspect the heater for broken, 

cracked, loose or corroded parts.

• 

Important: DO NOT use this product if it is damaged 

in any way. Contact Draper Tools to discuss repair and 

replacement options.

• Use the product only in the manner instructed in this 

manual and 

DO NOT modify it in any way.

• This heater is for indoor use 

ONLY.

• 

DO NOT expose this product to temperatures greater 

than 50°C.

• 

DO NOT use this heater in small rooms that are 

occupied by individuals that are not capable of 

leaving the room on their own, unless constant 

supervision is provided.

• 

DO NOT use the heater in dusty environments.

• Position the heater on a firm and level surface during 

use and ensure that the adjustable screws are tightly 

secured.

• The heater must 

ONLY be used in its upright position.

• 

DO NOT position the heater in close proximity to 

curtains or other combustible materials that may 

move and come into contact with the heater.

• Allow a minimum of 2m clearance between the 

fireguard and any nearby objects.

• 

DO NOT position this heater in the vicinity of 

combustible materials, in explosive environments or 

in the presence of flammable or combustible gases 

and vapours.

• 

DO NOT position this heater below or pointing 

towards a power socket or outlet.

• Lock the wheels when the heater is stationary.
• Ensure that the power switch is in the “OFF” (   ) 

position before connecting the heater to the power 

supply.

• 

ONLY use this product with power supplies that match 

the rated voltage of the heater.

NEVER use this heater with an extension lead, 

multi-socket or plug adaptor; it must be plugged 

directly into the power supply.

NEVER plug more than one heater into the same 

power outlet.

• 

NEVER abuse the power cord.

− Untangle the power cord fully before connecting 

it to the power supply.

NEVER remove the plug from the power supply by 

pulling on the cord.

DO NOT pull the product using the cable or plug.

− Keep the power cord away from sources of heat, 

liquids, sharp edges and moving parts.

− The power cord attached to this product is not 

suitable for use on building sites.

• 

NEVER allow the power cord to come into contact 

with other heated objects or direct the heater at the 

power cord or supply.

•  This is a Class I appliance.

− This product requires an earth connection to 

protect against electric shock from accessible 

conductive parts in the event of a failure of the 

basic insulation.

− To reduce the risk of electric shock, avoid body 

contact with earthed or grounded surfaces, such 

as pipes, radiators, ranges and refrigerators 

during use.

• 

ALWAYS check that the heater is positioned safely 

before turning it on.

• 

NEVER leave the heater unattended while it is on.

– 6 –

Summary of Contents for 04742

















Reviews: