Rev: 082916 P/N 651243100A
PEG PLUS Model
Public Educational & Governmental Access Encoder
QUICK SETUP GUIDE
© 2016 R.L. Drake Holdings, LLC. •
www.rldrake.com
• 937-746-4556
Model
Item #
Description
PEG-NE24-IP
1002606
HD PEG Channel Encoder with HD-SDI Input and IP Output
PEG-NE24-IP-C 1002613
HD PEG Channel Encoder with HD-SDI or Composite Video Input
with L/R Audio and IP Output
General Description
The PEG PLUS is a High Definition (HD)/Standard Definition (SD) video encoder with IP output. The PEG encoder has two
IP output two streams available in HD or SD in MPEG-2 and H.264 formats. The HD streams can be based on HD-SDI
input and the SD streams can be based on Composite, SD-SDI, or HD-SDI input source resolution. For each output stream,
UDP is encapsulated SPTS (single program transport stream). The PEG PLUS is controlled through a web page interface.
The web page provides remote monitoring and updating capabilities and SNMP traps for status updates.
Features
• Encodes two HD or SD streams of the same content in MPEG-2 and H.264 formats
• GUI-based menu for local & remote configuration (Password Protected)
• Unicast or Multicast is defined by the IP address
• Field-upgradable firmware
• Supports PNG images upon loss of input video
FRONT PANEL
1.
Ethernet Control:
10/100 Ethernet wired connection for local and remote management
2.
IP Reset Button:
When pressed for >2 seconds, the IP address of the control port will enable to the default factory IP
address (
172.16.70.1
,
Subnet Mask
255.255.255.0) The login credentials will also be enabled to the default username
admin
and password
pass
.
Note:
The old IP address, login, and password will still be present in the encoder settings.
3.
Status LEDs:
Provides a status of tasks performed by the PEG encoder in real-time:
Power:
The LED is illuminated when the power is ON.
Input:
The LED is illuminated when input video is being received from the HD/SD SDI or Composite input.
Encoding:
The LED is illuminated when the internal encoder is operational.
Output:
The LED is illuminated when the copper or optical SFP is connected to a network.
REAR PANEL
NTSC Composite Video/Audio In:
Analog video with Left and Right Audio.
HD-SDI IN:
Digital video HD/SD SDI input source
SFP Ethernet Output:
Optical or Copper SFP IP video and audio output
5VDC Power Port:
Accepts five-volt power to the device
1
2
3
4
5
6
7
8
PEG PLUS Operation
5
6
7
8
1
2
3
4