DragonEye Compact Speed LIDAR Operator Manual
32
DragonEye Technology, LLC |Doc. 30666 Rev. 03
Certification
An optional recertification program is available upon request. Please
contact your distributor for further information.
Maintenance and General Care
Your DragonEye Compact Speed LIDAR
TM
is designed to keep
performing with very little user maintenance. Besides replacing the
batteries, there are no user serviceable parts and the unit should
NOT be disassembled.
Cleaning
Periodic cleaning of the front lenses or HUD glass is only necessary if
they acquire significant dirt or other debris that limits optical
transmission. If cleaning is necessary, use compressed air or a soft
brush to remove loose debris first. Then use a soft tissue with water
or isopropyl alcohol, wiping from the center of the lens outward in a
spiral motion. The HUD glass may be cleaned with a cotton swab to
facilitate reaching the surfaces. Note: If you encounter a stain or
speck that cannot be removed with gentle pressure, do not increase
the cleaning pressure as this may damage the lens coatings. Small
scratches and stains during the lifetime of a unit are normal and will
not noticeably affect the performance of the LIDAR.
If necessary, the main body of the LIDAR can be cleaned with soapy
water or mild household cleaning solutions. Avoid the use of
acetone or ammonia.
Storage
When not in use, the DragonEye Compact Speed LIDAR
TM
should be
stored in moderate temperature, dry environments. Avoid leaving
