DragonEye Compact Speed LIDAR Operator Manual
26
DragonEye Technology, LLC |Doc. 30666 Rev. 03
second target and then press Enter
. The LIDAR will then
display the distance between the two targets on the side display.
The distance should be within 0.5 metres of the actual distance
between the targets.
If the LIDAR does not pass the test, carefully recheck the distances
and reposition the targets and LIDAR if necessary then repeat the
test. If the unit continues to fail the test, please contact customer
service.
Timed Distance Mode
Note: Timed Distance Mode may not be supplied on some Compact
Lidar models due to restrictions in the jurisdiction.
The Timed Distance Mode allows the LIDAR unit to be used to
determine a vehicle’s average speed over a known distance between
two visible reference objects along the roadway.
To enter the Timed Distance Mode, press Menu
and then use
the up/down arrows
to display “Timed Distance” on
the side display. Press Enter
. The side panel will display:
MODE
ENTER
MENU
MODE
ENTER
