DragonEye Compact Speed LIDAR Operator Manual
14
DragonEye Technology, LLC |Doc. 30666 Rev. 03
Critical Warning”, you may be able to restart the LIDAR and gain
usable time by switching the brightness and volume to the lowest
acceptable levels.
Jam / ECM Attempt Indication
The DragonEye Compact Speed LIDAR
TM
contains sophisticated
counter measures to defeat LIDAR “Jamming” devices available in
the consumer market place, while continuing to display accurate
speed calculations. The system also indicates when a jammer or
other Electronic Counter Measure (ECM) is detected on the target
vehicle by displaying the phrase “Jam ECM” on the side display and
flashing the “
” symbol in the HUD. Note that extremely bright
surfaces on the target vehicle, such as high beam headlights or sun
reflections can cause the jam indicators to turn on. If you experience
any difficulty locking in a speed reading when “Jam” is indicated, try
moving the HUD aiming point to another location on the vehicle.
Basic Operation
The following sections give an overview of the basic operation of the
DragonEye Compact Speed LIDAR
TM
for normal speed measurement
applications. Be sure to review the “Recommended System Checks”
section to understand the suggested daily performance checks and
periodic certifications. Additional details of special features and
other operation modes are given in “Advanced Controls and Modes”
sections.
