User Manual for LoRaWAN End Nodes - LHT65N LoRaWAN Temperature & Humidity Sensor Manual
Downlink Command:
No downlink command for this feature.
4.6 Set to sleep mode
Feature: Set device to sleep mode
•
AT+Sleep=0
: Normal working mode, device will sleep and use lower power when there is no LoRa message
•
AT+Sleep=1
: Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
AT Command: AT+SLEEP
Downlink Command:
• There is no downlink command to set to Sleep mode.
4.7 Set system time
Feature: Set system time, unix format.
AT Command:
Downlink Command:
0x306007806000 // Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
4.8 Set Time Sync Mode
Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server
must support v1.0.3 protocol to reply this command.
SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to
0.
AT Command:
Page 30 / 56 - last modified by Bei Jinggeng on 2022/07/06 13:48
