Dräger X-act 5000 Basic, Instructions For Use Manual, Page: 18 / 108

18 Dräger X-act 5000 Basic
Maintenance
4.2 Warnings
Warnings will be displayed together with the corresponding icon, and
if necessary, together with a written hint.
Possible warnings include:

Mandatory leak test

Activation strokes required

Desorption strokes required

No measurement in explosion-hazard areas

Battery empty

Invalid password

Replace SO
3
filter

"PUMPE <5°C/41°F START?"
5 Maintenance
5.1 Maintenance table
104 Boot loader
communication fault. Contact DrägerService.
105 Motor does not start. Contact DrägerService.
106 Motor does not stop. Contact DrägerService.
107 Motor too slow. Contact DrägerService.
108 Motor too fast. Contact DrägerService.
109 APS sensor out of
range. Contact DrägerService.
110 DPS sensor out of
range. Contact DrägerService.
111 DPS sensor fault Contact DrägerService.
112 Software integrity fault Contact DrägerService.
113 Data integrity fault Contact DrägerService.
114 Volume out of range. Calibrate flow or
contact DrägerService.
Text/Code Cause Remedy
WARNING
To prevent ignition of flammable or combustible atmospheres,
disconnect the power supply before carrying out maintenance
work on the Dräger X-act 5000 Basic.
Work to be performed
Eve
ry
year
E
ver
y t
w
o
y
ears
Calibrate flow. X
Have the Dräger X-act 5000 Basic inspected by Dräger. X
Change SO
3
filter.
X
1)
1) Or if indicated on the display
!