26
Supplement to the instructions for use
|
Isolette 8000 plus
Reprocessing
3. Tighten the two thumbscrews (A) on the air inlet filter cover.
2.8.2
Preparation before next use of device
2.8.2.1
Assembling and fitting patient-specific accessories and consumables
Fitting the disposable skin probe
1. Plug in the skin temperature probe to the sensor module.
2.8.2.2
Checking the operational readiness
Prerequisites:
– The device has been assembled and prepared so that it is ready for operation.
Procedure:
1. Check the operational readiness; see chapter "Getting started" in the
instructions for use for the main device.
48
11
4
A
A
