Dräger Infinity Delta, Instructions For Use Manual

Page: 92 / 614

3-16 D
ELTA
/D
ELTA
XL/K
APPA
VF8
3 N
ETWORK
A
PPLICATIONS
Privacy
When operating in Privacy mode, the monitor blanks the screen and silences audible
alarms at the bedside. This feature is helpful when such displays and alarms are
distracting to patients and visitors. All audible alarms are suppressed, and the screen is
blank except for the following message: Privacy: Press Main Screen to resume
monitoring.
All other monitoring functions remain active, and you can continue to monitor the
patient at the central station.
NOTE:
Recordings print on the recorder assigned to the local monitor and use that
monitor's settings for recording delay, duration, and speed. The remote patient’s
name and bed label are printed on the recording strip. (For more on timed and
continuous recordings, see Chapter 7, Recordings).
You cannot select waveforms for remote recordings. Waveforms are printed
according to the remote bed’s recording setup. If the remote bed is configured
for manual waveform selection (see page 7-9), the recording’s waveforms may
differ from those displayed on the Remote View menu.
If the local bed alarms while Remote View is displayed, the monitor behavior
depends upon the Remote View Display selection in the Unit Manager menu
(see page 2-9).
If the remote bed alarms, the top waveform and the alarming waveform channel
are displayed. In the presence of multiple alarms, the one with the highest alarm
priority is displayed.
For information about the Alarm Silence feature, see page 5-5.
NOTE:
Privacy mode is only available on bedsides connected to a central station. The
monitor exits privacy mode any time it is disconnected from the network or the
Infinity CentralStation.
The nurse call option is still supported in privacy mode.