manualshive.com logo in svg

Dräger Fabius 4116029, Technical & Service Manual, Page: 78 / 328

Share
Download
Dräger Fabius 4116029 Technical & Service Manual Download Page 78

Fabius

®

Repair Instructions

 

3-10

Cop

yr

ight

 2000 Dr

aeger

 M

edical,

 In

c.

sec3_

repa

ir

instr

uc_c.

fm

 

7

Debug Mode (software 2.00)

The following information is displayed in the debug mode during normal operation of 
Fabius: system data, measured values, error log. Two pages are available in this 
debug mode. System data cannot be changed.

7.1

Accessing the Debug Mode (software 2.00)

The debug mode can be accessed from any operating mode.

• Press the “Menu” key.

• Select “keycode” by turning rotary knob.

• Confirm selection by pressing rotary knob.

The selected numeric code is displayed on black background.

• Select keycode “1” (debug mode) or “2” (flow curve) by turning rotary knob one 

position clockwise.

• Confirm selection by pressing rotary knob.

• Press rotary knob again.

An additional screen page is displayed. Fabius remains in the normal operating mode 
and can be operated as desired.

7.2

Exiting the Debug Mode (software 2.00)

• Press the “Menu” key.

• Select “keycode” by turning rotary knob.

• Confirm selection by pressing rotary knob.

The selected numeric code is displayed on black background.

• Select keycode “0” by turning rotary knob one position counter-clockwise.

• Confirm selection by pressing rotary knob.

• Press rotary knob again.

Fabius is now in the normal operating mode.

RETURN TO CD-ROM TABLE OF CONTENTS

RETURN TO THIS MANUAL'S TABLE OF CONTENTS

Summary of Contents for Fabius 4116029









































































































































































































































































































































Reviews:

No comments