8
Dräger DrugTest 5000 Test System
Description
2.6
Explanation of Symbols
2.6.1
Special symbols
2.6.2
Charge indicator, optical and acoustic signals (from firmware version 2.0.0
1)
)
When switched on, the charge status can be seen on the charge status symbol; when turned off, the Analyzer gives visual and
audible feedback.
optional: external printer can be used
optional: Fast Mode
optional: external keyboard can be used
optional: Sensitivity Mode
1) Contact your Dräger representative to perform a firmware update.
Display
Charge status
Keyboard lights are flashing
(Analyzer is switched off)
Tones
(Analyzer is switched off)
Mains connection established
no signal
one short tone: connected
two short tones: disconnected
Restricted mains operation
no signal
no signal
Battery fully charged
Ana
lyzer
is
con
nected to th
e ma
ins
no signal
Battery 2/3 charged
no signal
Battery 1/3 charged
no signal
Battery almost empty
prolonged tone at intervals of two minutes
Battery empty, emergency
operation possible
prolonged tone at intervals of two minutes
Battery completely drained
prolonged tone at intervals of two minutes
Battery defective
no signal
no signal