Dräger D-Vapor, Instructions For Use Manual

Page: 69 / 120

Instructions for use D-Vapor/D-Vapor 3000
69
Operation
End of operation – draining the vaporizer
 Disconnect the vaporizer from the mains power
supply.
Only have the vaporizer drained by service
personnel.
Recommendation: Drain the vaporizer and make
sure there is adequate ventilation, as small
quantities of anesthetic agent vapor are always
released.
 Avoid contamination during draining.
Vaporizer not connected to the anesthesia
workstation
 The control dial remains engaged in the
T position (A).
Vaporizer with filling device of the Baxter
SAFE-FIL filling system for desflurane
(Suprane)
Draining the vaporizer
1 Press the unlocking button (A) and withdraw the
sealing plug (B) from the filling opening.
2 Take an undamaged anesthetic agent bottle
provided by Baxter for desflurane (Suprane).
Unscrew the cap.
3 Insert the anesthetic agent bottle (C) into the
filling port. The anesthetic agent bottle will
engage in the filling opening with an audible
clicking sound.
4 Turn the vaporizer upside down until the
anesthetic agent bottle is hanging vertically
downwards.
CAUTION
Health hazard
Take care not to spill anesthetic agent.
Do not inhale anesthetic agent vapor.
WARNING
Risk of administering the incorrect anesthetic
agent or anesthetic agent mixtures.
Anesthetic agent which has been drained off
must be handled, stored and disposed of as a
pharmaceutical drug in accordance with the
hospital regulations and the statutory provi-
sions of the country of use.
06
0
0
A
023
024
0
Vol.%
A
B
0
2
3
4
C