Dräger D-Vapor, Instructions For Use Manual

Page: 34 / 120

Operating concept
34
Instructions for use D-Vapor/D-Vapor 3000
Permanent connection
For permanent installation in the fresh-gas line for
anesthesia workstations, with the appropriate
connector options.
For anesthesia workstations with several
connectors combined with Interlock NMD.
When a vaporizer is switched on, the levers are
activated. These levers prevent other vaporizers on
adjacent plug-in connectors from being switched
on.
Illustration: central vaporizer operational, right and
left vaporizers blocked.
Other Interlock systems are also used, such as
Interlock 1, which are very similar to Interlock NMD
but which do not need to fit vaporizers with
Interlock NMD.
ISO conical adapter
The ISO conical adapter is used for anesthesia
workstations with 23 mm (0.91 in) conical
connectors conforming to ISO 5356-1.
A Male adapter cone on the vaporizer inlet
B Female adapter cone on the vaporizer outlet
Connection and Interlock systems for D-Vapor 3000
D-Vapor 3000 is only available with the Dräger
Auto Exclusion plug-in adapter, see "Dräger
Auto Exclusion plug-in adapter" on page 32.
009
010
01
1
B
A