Dräger D-Vapor, Instructions For Use Manual

Page: 105 / 120

Instructions for use D-Vapor/D-Vapor 3000
105
Technical Data
Weight D-Vapor/D-Vapor 3000
EMC Declaration
General information
This device was tested for electromagnetic
compatibility using accessories from the list of
accessories. Other accessories may only be used
if they do not compromise the electromagnetic
compatibility. The use of non-compliant
accessories may result in increased
electromagnetic emissions or decreased
electromagnetic immunity of the device.
This device may be used in the direct vicinity of
other devices only if Dräger has approved this
device arrangement. If no approval has been given
by Dräger, it must be ensured that this device
functions correctly in the desired arrangement
before use. The instructions for use for the other
devices must be followed.
Electromagnetic environment
This device may only be used in environments
specified in section "Environment of use"
on page 16.
Connector Weight in kg (lbs)
Empty Filled
Auto Exclusion
or DW-2000 6.4 (14.1) 6.9 (15.2)
S-2000 6.2 (13.7) 6.7 (14.8)
ISO conical
adapter 6.4 to 6.7
(14.1 to 14.8)
6.9 to 7.2
(15.2 to 15.9)
Permanent
connection 5.8 (12.8) 6.3 (13.9)
Emissions Compliance
Radiated emissions Class A, Group 1 (30 MHz to 1 GHz)
Conducted emissions Class A, Group 1 (150 kHz to 30 MHz)